Tea Extracting System Have Been Installed

Last week, we have shipped one set of tea extracting line to our customer. And we have sent two engineers this week to customer's site and today we have completed the commissioning of this set. The tea extracting machine is now working well to make bottled.

The complete set of equipment supply includes: demister, condenser, cooler, oil-water separator, filter, cylinder console and other accessories.

Composition of this system:

The system can be positive cone type, mushroom type, straight cylinder type, oblique cone type or inverted cone type. It can be used for static extraction, or a stirrer can be configured for dynamic extraction according to the needs of the production process.

1. The main tank body, with jacket and insulation, has manholes on the top, and a cylinder on the bottom to control the switch of the slag door, with low labor intensity.

2. The trap is mainly used to eliminate the foam generated when decocting traditional Chinese medicine, and prevent the dregs in the steam of the medicinal stream from entering the condenser.

3. The condenser is mainly used to condense the liquid vapor and recover the alcohol.

3. The cooler is mainly used to cool the condensate and the solvent.

4. The oil-water separator is mainly used to separate the oil from the cooled recovered liquid to obtain the desired aromatic oil.

5. The gas-liquid separator separates the vapor and liquid to prevent the liquid from being carried out of the tank when emptying.

6. The agitator stirs the materials in the tank, so that the extracted solid internal effective components can be heated evenly and completely decocted, which is conducive to slag removal.

Working flow of this extracting system:

Extraction tank is a commonly used leaching extraction equipment, especially suitable for leaching and extraction of components contained in plant products. The structure has a tank body, a screw propeller or a propeller propeller with an axial position device in the tank body, and is connected with the rotating shaft disk outside the tank body, and it is characterized in that it has a set of continuous counter current leaching and extraction single tanks which are inclined horizontally, and the tank is separated from each other. The feed port is connected with the feed port to form a communication device. The upper part of the low end of each single tank has a feed port, the lower part has a residual liquid discharge port, the upper part of the high end of the tank body has a liquid inlet or exhaust port, and the lower part has an outlet port. Feed mouth.

Function of this tea extraction system:

Extracted tea is made from finished tea or semi-finished tea as raw material, extracting solubles in tea leaves with hot water, and filtering out tea residues. Tea in liquid or solid form, they are collectively called extract tea. "Extraction", also known as "extraction", is one of the key links in the production process of tea beverages, and it is also a crucial process that affects the quality of tea beverages. The quality of the extraction effect directly affects the utilization rate of tea raw materials and The subsequent production process, so an efficient extraction process makes sense for tea development.